Surface Prep

Please see below a summary of what is covered on this course:

 

WJA – SURFACE CLEANING & PREPARATION COURSE 

1 REGISTRATION & INTRODUCTION

2 REVIEW KEY SAFETY AWARENESS ISSUES (include only when presented as a ‘Stand-Alone’ Course). Nozzles & jets - pumps & ancillaries - pressure controls - water jetting hose - hazards & Injuries - PPE - operational procedures

.

3 APPLICATIONS & MACHINES:
Scope of surface cleaning & preparation applications. Range of tasks, and differentiation between surface cleaning & surface preparation. Range of jetting machines suitable for surface cleaning / preparation.

4 JETTING EQUIPMENT – NOZZLES & ANCILLARIES:
Review nozzle principles – fixed jet nozzles, rotating nozzles, life & wear characteristics, associated ancillary equipment including automatic, semi automatic & wet abrasive blasting.

5 JETTING EQUIPMENT - HIGH PRESSURE HOSE:
Hose used in surface cleaning & preparation applications, damage & wear possibilities, hose ancillaries. Review bore size & flow ratings.

6 JETTING EQUIPMENT – MACHINES:
Range of jetting machines used - engine controls & instruments. Pump pressure controls, review dump / dry shut & selector / fail safe types, auto engine speed control systems, pressure safety relief.
Water supply / delivery features – filtration requirements, boost feed pumps, built-in anti freeze provisions.

7 JOB ASSESSMENT & PLANNING:
Information & assessment – site location, access to work area, surface to be cleaned & layout; base material & contaminants – initial condition and required finished condition; water provision, waste disposal, hazards. Selection of equipment & manning levels – jetting machine / nozzles / accessories, number & duties of operators, single person operation. Determine job method, based on safe system of work.

8 OPERATIONAL PROCEDURES:
Daily checks – manufacturer’s instructions, other items requiring regular checks.
Setting up – permits / authorisations, barriers & warning signs, positioning of machine & equipment, team duties & signals, flushing, leaks check, trial run. Monitoring of operation – flying debris, waste contamination, work standard. Job completion – client inspection, waste removal, equipment decontamination, return site to safe condition.

9 PRACTICAL EXERCISES:
Jetting machine & equipment – review features and demonstrate daily checks, start / run / stop.
Job assessment – review & discuss - site location & constraints, accessibility, screening / extraction requirements. Work surface - nature of contamination, work to be carried out & standard of finish. Water supply, effluent drainage. Hazards & use of PPE. Discussion of options, agree job method.
Site preparation – setting up work area. Team talk – review job method, signals, set up team(s). Positioning of jetting machine, layout & check equipment. Demonstrate all procedures to full group. For all teams, instruct each operator in each duty. Trainees carry out exercise - each team following instructions to set up, flush, check for leaks, carry out trial run, proceed with operation. Rotate team members through duties. Review at each rotation and final review. Disconnect equipment & clear site.

10 SUMMARY:
Review of course content as above, with opportunity for further discussion prior to questionnaire.